B600 B-Series

Analog Voice Card

B600 B-Series

4 Port FXO and 1 Port FXS

Introducing the Sangoma B-Series — now even cost-conscious customers can opt for Sangoma’s premium audio and engineering quality by choosing the voice card designed specifically for smaller-budget installations.

  • 4 Simultaneous PSTN Calls (Per Interface Slot)
  • Compatible with All Commercially Available Motherboards
  • 5 year Warranty (With Product Registration)
  • Hardware Echo Cancellation Available
  • Hardware Fax Synching Support

1 port of FXS and 4 ports of FXO. Introductory series optimized for small-budget installations. With B-Series hardware, Sangoma’s premium audio and engineering quality is even more affordable.

For small, stable systems, when the modular design, single-slot expansion and port-customization power of Sangoma’s A200 and A400 series is not required. The Sangoma B600 voice cards deliver customers a substantial cost savings, coupled with the “because it must work” quality and the Wanpipe® high-end system diagnostics, drivers, and utilities for which Sangoma is known worldwide.

Your customers can achieve optimum echo-cancelled voice quality and enhancement by choosing models with Telco-Grade DSP Hardware Echo Cancellation. One DSP echo canceller on the B600D or B600DE voice card provides Telco-grade hardware echo cancellation on all channels with no additional CPU load and minimal additional cost.

Technical Specifications

  • 4 ports of FXO and 1 Port of FXS.
  • Support for Asterisk®, FreeSWITCH, Yate, trixbox, and PBX/IVR projects, as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications.
  • Single synchronous PCI and PCI Express interface for all ports.
  • Dimensions: 2U Form factor: 140 mm x 55 mm for use in restricted chassis.
  • Includes both standard and short half-height compatible mounting clips for installation in 2U rack-mount servers.
  • 32 bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host processor intervention.
  • Autosense compatibility with 5 V and 3.3 V PCI busses.
  • Fully PCI 2.2 and PCI Express compliant, compatible with all commercially available motherboards, proper sharing of PCI interrupts.
  • Power: 3.6 W (0.3 A @ 12 V) and 1.65 W (0.5 A @ 3.3 V).
  • Temperature range: 0 – 50 °C.
  • Cables are included.
  • Supports Fax: Single FXS Port designed for optimum fax support.
  • Sangoma B600 cards synchronize perfectly with Sangoma’s T1/E1 cards and the PSTN clock for error-free fax and modem passthrough over T1 lines.
Analog Telephony
A200 FXO/FXS
A400 FXO/FXS
B600 B-Series
USB FXO B-Series
Brochures

B600 B-Series, Datasheet, English