Norstar system expansion hardware

You can add expansion modules to the Norstar MICS system to customize it for a particular business' size. If you need more incoming lines (CO trunks), add a trunk expansion module to accommodate additional trunk cards. If you need more phones on the system, add a station expansion module. All modules must be connected back to the system with an expansion card (either 2-port or 6-port cards). Expansion hardware components can be purchased separately or included with a complete Plug-'n-Talk system.

M0x8AM Analog Station Expansion Module (available new and refurbished)

The M0x8AM analog station module allows the addition of up to eight analog devices (such as cordless phones or fax machines) on a Modular system. An expansion card in the KSU is required to connect the station module to the KSU. All modules come complete with a DS-30 connection cable and wall-mount brackets.

Description	New	Refurbished
M0x8AM analog station expansion module	$750	$600

$225 based on stock availability

FastRAD remote access device

The FastRAD allows a dial-up connection to be established between a PC and a Norstar telephone system. The system can then be programmed remotely through the PC. Any programming change can be made to the system and the voice mail, with the exception of CCR greetings, which must be performed on site. All Plug-'n-Talk Norstar system packages come with a remote access device for our technicians to service the equipment when programming is purchased.

Note: Compact ICS systems ship with a built-in I-RAD internal remote access device which is enabled in the software.

$150 new $110 refurb

ATA-2 analog terminal adapter

The ATA-2, or ATA, allows any standard analog device, such as a fax machine or cordless phone, to be attached to the Norstar phone system. Inbound calls can be routed directly to the ATA, or can be manually transferred. Any device attached to the ATA can make an outbound call using one of the available lines of the system. Each ATA takes up one (1) station port on the system.

Note:Compact ICS systems ship with a built-in I-ATA internal analog terminal adapter which is enabled in the software, and does not take up a station port.